Skip to main content
Xsite Excavation controlUser-friendly in each of your jobs sites

Xsite EASY

Ideal for simple earthworks

Select System

Xsite PRO 2D

Efficient 2D excavator control for optimum results in earthworks

Select System

Xsite PRO 3D

Professional 3D excavator control for optimal results in earthmoving

Select System

Challenges in excavation work


Exact Depth

During Excavation the driver can only assume the correct depth. To verify the depth needs to be checked manually.

COMPLEX DESIGN

Creating surfaces with multiple slope changes requires even more manual checks.

High operating costs

Manual measurement causes high operating costs and requires a lot of time.

Inclination

The operator can only visually duplicate previous slopes and then manually check them.

Safety

The surveyor who measures the depth manually has to move into a risk zone.

EXPERIENCE

If the operator has not enough experience it will be difficult to get a good result.

Excavator control system for better earthworks

01

IDEAL IMPLEMENTATION OF SIMPLE EARTHWORKS

Xsite EASY

The 2D system Xsite EASY measures depth, elevation and inclination of the scoop and shows the scoop position graphically and numerically on the display. The upper carriage sensor thereby guarantees correct measurements for every excavator position, whether on a slope or on level ground. An optional LED display additionally shows at a glance whether the target level has already been achieved, or whether further excavation is required. Thereby you always maintain an overview of the exact work progress and you can accurately implement specifications.

PerformanceSafetyAssistenz

Download BrochureGet in Touch

Optimal for every smaller construction site

Our robust Xsite EASY ideally equips you for the daily construction routine. Harsh weather conditions, rough terrain or poor visibility do not pose a challenge any more. The excavation system allows you to maintain the correct perspective. The system is ideally suited for foundation construction, excavation or embankment construction, or for leveling or under water excavation.

bedienung_white

Easy to operate

The precise bucket position is shown to the operator graphically and numerically on the display in real time. This information enables the machine operator to know the exact position and progress of the work at any time. The operator can work exactly according to plan and meet the requirements exactly and fast.

laserreferenz_white

LASER AS REFERENCE

The system’s laser receiver enables moving your machine at the site without losing the original level. The laser can also act as a reference level.

upgradefaehig_white

Upgradeable

Thanks to the CAN-based development of further hardware components focused on system modularity, the system can be upgraded from 2D to 3D functionality in a very short time and cost-efficiently. Invest in this modular system to keep all its features accessible and increase your ROI.


Xsite EASY System components

  • Graphic display

    Graphic display

    Graphical and numerical display of all working steps during excavator operations.

  • Gravitation sensor

    Gravitation sensor

    3-axis tilt sensor with a measuring range of 360° per axis.

  • LED Display

    LED Display

    Additional LED display for fast detection of current bucket position.

  • Laser receiver

    Laser receiver

    Automatical laser grade control

02

Efficient 2D excavator control for better Dredging results

Xsite PRO 2D

With Xsite PRO you can also benefit from additional features, like up to two GNSS antennas, which determine the position of the excavator via satellite. Thanks to the fast processor, the measured values are processed in real-time and are displayed on the 8.4“ graphic display immediately. The option of defining multiple profiles for different work assignments and having them ready at any time saves time, fuel and material and at the same time increases the efficiency of your machine.

PerformanceSafetyAssistant

Download BrochureGet in Touch

Well prepared for every construction site

With the Xsite® PRO 2D system you are always well equipped for all requirements of a construction site. Whether simple work or complex construction projects, MOBA excavator controls provide a perfect interaction between all components to provide a precise, efficient result. Thanks to the modular structure of the 3D software, Xsite PRO can also be upgraded at any time. The Xsite® PRO system enables the smooth handling of network correction services, base stations and GNSS receivers from different manufacturers. This eliminates single manufacturer commitment and allows you to work on multiple projects without the risk of incompatibility. In addition, the system is compatible with third-party software such as BIM cloud providers. Different openBIM data formats can be used without conversion or compatibility problems. This gives you a significant market leadership position in a competitive market.

Easy to operate

The precise bucket position is shown to the operator graphically and numerically on the display in real time. This information enables the machine operator to know the exact position and progress of the work at any time. The operator can work exactly according to plan and meet the requirements exactly and fast.

mobilersupport_black

Remote Support

With remote support, your local reseller can provide you with guidance without having to visit the site. Remote support connects your system to the service centre and can be used to offer training, advice or troubleshooting.

Upgradeable

Thanks to the CAN-based development of further hardware components focused on system modularity, the system can be upgraded from 2D to 3D functionality in a very short time and cost-efficiently. Invest in this modular system to keep all its features accessible and increase your ROI.


Xsite PRO 2D System components

  • Operating panel

    Operating panel

    Rugged 8.4" touch screen display for optimal working experience with Xsite PRO controls.

  • Controller

    Controller

    Real-time processing of all incoming position data from the connected sensors.

  • Gravitation sensor

    Gravitation sensor

    3-axis tilt sensor with a measuring range of 360° per axis.

  • Laser receiver

    Laser receiver

    Automatical laser grade control

  • LED Display

    LED Display

    Additional LED display for fast detection of current bucket position.

  • GNSS Compass

    GNSS Compass

    Provides important data that is important for the direction of the upper structure and the basis for adjusting the target grade.

03

High-end 3D excavator control for optimal excavation work

Xsite PRO 3D

With Xsite PRO 3D you can also benefit from additional features, like up to two GNSS antennas, which determine the position of the excavator via satellite. Thanks to the fast processor, the measured values are processed in real-time and are displayed on the 8.4“ graphic display immediately. The option of defining multiple profiles for different work assignments and having them ready at any time saves time, fuel and material and at the same time increases the efficiency of your machine.

PerformanceSafetyAssistenz

Download BrochureGet in Touch

Developed for complex construction sites

With the Xsite® PRO 3D system you are always well equipped for all requirements of a construction site. Whether simple work or complex construction projects, MOBA excavator controls provide a perfect interaction between all components to provide a precise, efficient result. Thanks to the modular structure of the 3D software, Xsite® PRO can also be upgraded at any time. The Xsite® PRO system enables the smooth handling of network correction services, base stations and GNSS receivers from different manufacturers. This eliminates single manufacturer commitment and allows you to work on multiple projects without the risk of incompatibility. In addition, the system is compatible with third-party software such as BIM cloud providers. Different openBIM data formats can be used without conversion or compatibility problems. This gives you a significant market leadership position in a competitive market.

bedienung_white

Easy to operate

The precise bucket position is shown to the operator graphically and numerically on the display in real time. This information enables the machine operator to know the exact position and progress of the work at any time. The operator can work exactly according to plan and meet the requirements exactly and fast.

mobilersupport_white

Remote Support

With remote support, your local reseller can provide you with guidance without having to visit the site. Remote support connects your system to the service centre and can be used to offer training, advice or troubleshooting.

liveupload_white

LIVE UPLOAD

Compatible with third-party cloud solutions such as file transfer and fleet management. If required, wireless data transfer also allows preparing the data from the office, whether for further development, documentation or support purposes.


Xsite PRO 3D System components

  • Operating panel

    Operating panel

    Rugged 8.4" touch screen display for optimal working experience with Xsite PRO 3D controls.

  • Controller

    Controller

    Real-time processing of all incoming position data from the connected sensors.

  • Gravitation sensor

    Gravitation sensor

    3-axis tilt sensor with a measuring range of 360° per axis.

  • Laser receiver

    Laser receiver

    Automatical laser grade control

  • LED Display

    LED Display

    Additional LED display for fast detection of current bucket position.

  • GNSS Antenna

    GNSS Antenna

    Precise location in the terrain with GNSS coordinates. This reduces the surveying effort by up to 90% and optimises the user experience.