Skip to main content
MDS drilling system

MDS-1000

The basic system is equipped with the most important features and convinces by its excellent usability.

Select System

MDS-2000

High-end drilling system for a smooth workflow during blast hole borings.

Select System

CHALLENGES regarding blast hole drillings


Machine alignment

Aligning the machine is an additional difficulty in the slope alignment of the drilling arm.

PARALLEL DRILL HOLES

It’s difficult to drill parallel holes, only with marks on the ground.

Exact depth

It’s nearly impossible to drill all holes to the same depth without any measuring system.

High operation costs

The manual measuring causes high operating expenses and is also a huge time factor.

Safety

If the boreholes are drilled in the wrong position, explosions may result in rockfall and a dirty break-off edge.

Drill alignment

It’s difficult to drill all the holes in the same angle.

Machine control systems for drill rig or Ram

01

Drilling system for precise blast hole borings

MDS-1000

With MOBA’s MDS-1000 drilling system, you can prepare your blast with precisely measured, uniform drill holes and immediately increase your cost efficiency. Save yourself time-consuming manual measurements and drill absolutely parallel holes of the same depth and angle in just a few simple steps with the assistance system.

Performance

Download BrochureGet in Touch

Add-on system for every drill rig

Thanks to exceptional modularity, you can also benefit from cost- and time-efficient upgrades from a varied selection of additional components. As a basic system, the MDS-1000 is equipped with the most important features and is particularly convincing on account of its user-friendliness.

Easy to operate

With the ergonomic MOBA wheel, which can also be easily operated with gloves, you simply select the desired function. Thanks to the real-time visualisation of the depth, number of rods and the ACTUAL and TARGET inclination of the drill arm, you always have an overview of the current situation.

Upgradeable

Profit from cost- and time-efficient upgrades from a wide range of additional components thanks to exceptional modularity.


MDS-1000 System components

  • Operating Panel

    Operating Panel

    Intuitive and easy to use, it gives you all the important information such as depth, quantity of bars and ACTUAL and TARGET inclination of the boom.

  • DEPTH GAUGE

    DEPTH GAUGE

    Precise measurement of the bore depth with the rotary encoder. It has a measuring range of 360° and a PWM/analog interface.

  • INCLINATION SENSOR

    INCLINATION SENSOR

    2-axis tilt sensor with a measuring range of ±60°. The zero point adjustment is done via an infrared interface.

02

High-end drilling system TO IMPROVE MINING OPERATIONS

MDS-2000

The high-end MDS-2000 drilling system from MOBA allows you to prepare your blast with precisely measured, uniform drill holes and increase your cost efficiency immediately. Save time-consuming, manual measurements and drill parallel holes of the same depth and angle in just a few steps using the assistance system. Thanks to extraordinary modularity, you can also benefit from cost- and time-efficient upgrades from a varied selection of additional components.

PerformanceSafetyAssistenz

Download BrochureGet in Touch

GRAPHIC DISPLAY GD-320

The graphic display GD-320 takes your drilling machine to the next level. Thanks to full integration into your machine and cloud connection, you benefit not only from the transfer of all drilling-relevant data, but also from values for machine and motor data. This allows you to plan machine maintenance in advance and actively prevent breakdowns. By determining the position of the machine, you never lose sight of it and always have an overview of the productivity of your drilling machine fleet. How to increase your ROI.

liveupload_white

LIVE UPLOAD

Thanks to the telemetry module with seamless cloud integration, you can send your borehole data as well as engine data such as oil pressure or acceleration directly from the machine to the office. Not only do you maintain an overview for later data analyses, but you can also react immediately if the machine data is conspicuous.

offene_Dateiformate_white

Open Data Formats

Import 3D models from Quarry X into the system for even more precise work. The operator only has to position the machine as shown, adjust the orientation of the mast and start drilling.

 

positionsbest_white

Positioning

Piler and Compass extension allow exact positioning of the machine in the terrain.


MDS-2000 System components

  • Graphic display

    Graphic display

    Graphic display with real-time data from all drilling-related data and machine and engine parameters.

  • INCLINATION SENSOR

    INCLINATION SENSOR

    2-axis tilt sensor with a measuring range of ±60°. The zero point adjustment is done via an infrared interface.

  • DEPTH GAUGE

    DEPTH GAUGE

    Precise measurement of the bore depth with the rotary encoder. It has a measuring range of 360° and a PWM/analog interface.

  • Boom Sensor

    Boom Sensor

    Exact measurement of the mast's cross slope. It has a measuring range of 360° as well as a PWM/analog interface.

  • Controller

    Controller

    It processes and calculates all system data in real time and controls all connected components.

  • Direction Finder

    Direction Finder

    Detects the direction in which the machine is moving in order to check its position. The direction finder is adjusted for reference.

  • GNSS Antenna

    GNSS Antenna

    Precise positioning of the machine in the terrain and works with GNSS and GLONASS. The antenna replaces the direction finder.

  • Gateway CG-1

    Gateway CG-1

    Use the telemetry module to send data on your boreholes and engine data such as oil pressure or acceleration directly from the machine to the office with perfect cloud integration.